English
 |
648
816
Internal gear
Ball
58
M VSI200744-N
| INA PART NO. | VSI200744-N |
| MAS PART NO. | M VSI200744-N |
| SERIES | VS |
| GEAR | Internal gear |
| TYPE | Ball |
| System of Measurement | Metric |
| Internal Diameter(mm) | 648 |
| Outside Diameter(mm) | 816 |
| Internal Diameter On Outer Ring Di | 745.5 |
| External Diameter On Inner Ring do | 742.5 |
| Height of Overall Bearing Assembly H | 56 |
| Weight(kg) | 58 |
| Bolt Circle In Out Ring Lo(mm) | 790 |
| NO.Holes In Out Ring no | 40 |
| Bolt Circle In Inner Ring Li(mm) | 705 |
| NO.Holes In Inner Ring ni | 40 |
| NO. of Gear Teeth z2 | 110 |
| b(mm) | 660 |
| dazt(mm) | 741 |
| D azt(mm) | 814 |
| Maximum Allowable Radial Load | 165200 N |
| Maximum Allowable Bending Fatigue Strength of Gear Teeths | 23700 N |
| Maximum Allowable Contact Fatigue Strength Of Gear teeth | 35000 N |
| Basic Dynamic Load Rating Axial (Ca) | 173000 N |
| Basic Static Load Rating Axial (C0a) | 1190000 N |
| Basic Dynamic Load Rating Radial(Cr) | 157000 N |
| Basic Dynamic Load Rating Radial(COr) | 550000 N |
| Maximum Radial Bearing Clearance | 0.3 |
| Maximum Axial Tilting Bearing Clearance | 0.53 |
| Taper Type Lubrication Nipples | 4 |
| Tooth modules | 6 |
| masbearing@outlook.com | |
| Mob/Wechat | +86 15255522117 |
| INA PART NO. | VSI200744-N |
| MAS PART NO. | M VSI200744-N |
| SERIES | VS |
| GEAR | Internal gear |
| TYPE | Ball |
| System of Measurement | Metric |
| Internal Diameter(mm) | 648 |
| Outside Diameter(mm) | 816 |
| Internal Diameter On Outer Ring Di | 745.5 |
| External Diameter On Inner Ring do | 742.5 |
| Height of Overall Bearing Assembly H | 56 |
| Weight(kg) | 58 |
| Bolt Circle In Out Ring Lo(mm) | 790 |
| NO.Holes In Out Ring no | 40 |
| Bolt Circle In Inner Ring Li(mm) | 705 |
| NO.Holes In Inner Ring ni | 40 |
| NO. of Gear Teeth z2 | 110 |
| b(mm) | 660 |
| dazt(mm) | 741 |
| D azt(mm) | 814 |
| Maximum Allowable Radial Load | 165200 N |
| Maximum Allowable Bending Fatigue Strength of Gear Teeths | 23700 N |
| Maximum Allowable Contact Fatigue Strength Of Gear teeth | 35000 N |
| Basic Dynamic Load Rating Axial (Ca) | 173000 N |
| Basic Static Load Rating Axial (C0a) | 1190000 N |
| Basic Dynamic Load Rating Radial(Cr) | 157000 N |
| Basic Dynamic Load Rating Radial(COr) | 550000 N |
| Maximum Radial Bearing Clearance | 0.3 |
| Maximum Axial Tilting Bearing Clearance | 0.53 |
| Taper Type Lubrication Nipples | 4 |
| Tooth modules | 6 |
| masbearing@outlook.com | |
| Mob/Wechat | +86 15255522117 |
