| INA PART NO. | VSI250955-N |
| MAS PART NO. | M VSI250955-N |
| SERIES | VS |
| GEAR | Internal gear |
| TYPE | Ball |
| System of Measurement | Metric |
| Internal Diameter(mm) | 810 |
| Outside Diameter(mm) | 1055 |
| Internal Diameter On Outer Ring Di(mm) | 953 |
| External Diameter On Inner Ring do(mm) | 957 |
| Height of Overall Bearing Assembly H(mm) | 80 |
| Weight(kg) | 149 |
| Bolt Circle In Out Ring Lo(mm) | 1015 |
| NO.Holes In Out Ring no | 30 |
| Bolt Circle In Inner Ring Li(mm) | 894 |
| NO.Holes In Inner Ring ni | 30 |
| NO. of Gear Teeth(z2) | 83 |
| b(mm) | 830 |
| dazt(mm) | 955 |
| D azt(mm) | 1053 |
| Maximum Allowable Radial Load | 363300 N |
| Maximum Allowable Bending Fatigue Strength of Gear Teeths | 68000 N |
| Maximum Allowable Contact Fatigue Strength Of Gear teeth | 98900 N |
| Basic Dynamic Load Rating Axial (Ca) | 430000 N |
| Basic Static Load Rating Axial (C0a) | 3400000 N |
| Basic Dynamic Load Rating Radial(Cr) | 390000 N |
| Basic Dynamic Load Rating Radial(COr) | 1550000 N |
| Min Radial Bearing Clearance | 0.03 |
| Maximum Radial Bearing Clearance | 0.13 |
| Min Axial Tilting Bearing Clearance | 0.05 |
| Maximum Axial Tilting Bearing Clearance | 0.24 |
| Taper Type Lubrication Nipples | 4 |
| Tooth modules | 10 |
| masbearing@outlook.com | |
| Mob/Wechat | +86 15255522117 |
Home Slewing Bearing Application About Us Resources News Contact Us